Comp Cams and Tune

Cobalt07LS · 09-26-2008, 04:13 PM

Ok so I was sittin here online and started to looking at some cobalts and came across a 2.2 with the Comp Cams Stage 1 Cams. I found them on Turbotech (Competition Cams Chevrolet Cavalier/Cobalt 2.2L Ecotec 2002-06 - Turbo Tech Racing, LLC) and was wondering if I change out my cams will it cause a check engine light? I unfortunately live in a state that has to pass that emission unlike some states in the US. Also with the install of the cams it says it's not required but I was looking around and found that some people are using the Trifecta tuning program. Went to the website and looked around but I'm still unsure about how it works. Has anyone used this program??

I'm not plannin on doing this anytime soon, it's just an idea to see whats available for the 2.2 motor. Also I was looking at the Eagle Connecting rods (Eagle Connecting Rods Cavalier/Sunfire 2002-05 Cobalt 2005-08 Ion 2004-08 ALL 2.2L ECOTEC Only - Engine Internals - Turbo Tech Racing, LLC). I was just wanting an opinion and to see if anyone has done these mods and what kind of hp did ya'll gain. I am planning on doing the 2.4 Intake manifold swap and doing the full cat-back exhaust here soon.

YELLOWLt · 09-26-2008, 07:26 PM

IF there CAr you Found was Yellow I know who you're talking about. I would suggest a tune to be able to use the cams, more efficiently. The Trifecta Tune is a base tune and then you log data send the data to the tuner and he tweaks the tune and sends you a new tune. If you have to pass emissions I recommend using adjustable timing gears. You can create the same effect as having Stage 1 cams just with adjusting the timing in the Cobalt. As for Turbotech I've ordered most of my parts from them without issues.

Cobalt07LS · 09-26-2008, 07:55 PM

Adj. timing gears? Do you know who has those available?? Do I need these with the trifecta tune?

DUFFY · 09-26-2008, 08:20 PM

I know I've seen them a few other places. Here's the link to the ones crate engine depot has. Ecotec Adjustable Cam Gear Set 88958613 - Crate Engine Depot

You can search a few more of these websites and see what you come up with. Websites for parts

EDIT: I also found these at J-Body Performance Part Details JP0889

Maven · 09-28-2008, 01:47 AM

While a tune will obviously help you get the most out of the cams, its the least of your concerns.

The Comp cams for the 2.2 will work in your car only once you: remove the camshaft reluctor wheel from your stock intake cam and have it PROPERLY pressed onto the new Comp cam and timed to the cam, then you need to have the intake cam shortened. These cams ARE NOT a bolt in mod.

1^up · 09-28-2008, 11:56 AM

i like reading your posts maven

make more there filled with good info! help me mod my car? lol

Delta2.2 · 09-28-2008, 01:40 PM

if ur car is a 2007 or newer 2.2 cobalt, CAMS WONT WORK. just letting you know

1^up · 09-28-2008, 05:17 PM

gay

Maven · 09-28-2008, 06:40 PM

no, they work, just with the caveats I listed.

Delta2.2 · 09-28-2008, 08:15 PM

Quote:

Originally Posted by Maven

no, they work, just with the caveats I listed.

odds of him actually knowing what all that means and doing it are slim.

plus how much do u have to take off of the intake cam?? that would be useful info IMO

09-26-2008, 04:13 PM	#1
Cobalt07LS Member Join Date: Jan 2008 Location: Smithfield, NC Age: 21 Posts: 495 Credits: 7,144	Comp Cams and Tune Ok so I was sittin here online and started to looking at some cobalts and came across a 2.2 with the Comp Cams Stage 1 Cams. I found them on Turbotech (Competition Cams Chevrolet Cavalier/Cobalt 2.2L Ecotec 2002-06 - Turbo Tech Racing, LLC) and was wondering if I change out my cams will it cause a check engine light? I unfortunately live in a state that has to pass that emission unlike some states in the US. Also with the install of the cams it says it's not required but I was looking around and found that some people are using the Trifecta tuning program. Went to the website and looked around but I'm still unsure about how it works. Has anyone used this program?? I'm not plannin on doing this anytime soon, it's just an idea to see whats available for the 2.2 motor. Also I was looking at the Eagle Connecting rods (Eagle Connecting Rods Cavalier/Sunfire 2002-05 Cobalt 2005-08 Ion 2004-08 ALL 2.2L ECOTEC Only - Engine Internals - Turbo Tech Racing, LLC). I was just wanting an opinion and to see if anyone has done these mods and what kind of hp did ya'll gain. I am planning on doing the 2.4 Intake manifold swap and doing the full cat-back exhaust here soon.
Offline

09-26-2008, 07:26 PM	#2
YELLOWLt Member Join Date: Mar 2008 Location: Maryland Posts: 289 Credits: 5,392 gXboxLive Leaderboard: 10^th	IF there CAr you Found was Yellow I know who you're talking about. I would suggest a tune to be able to use the cams, more efficiently. The Trifecta Tune is a base tune and then you log data send the data to the tuner and he tweaks the tune and sends you a new tune. If you have to pass emissions I recommend using adjustable timing gears. You can create the same effect as having Stage 1 cams just with adjusting the timing in the Cobalt. As for Turbotech I've ordered most of my parts from them without issues. __________________ '06 Cobalt LT Yellow Mods: Performance Magnaflow Cat-Back, Modified GMPP header,Injen Cold Air Intake, Driver Mod, Driver Weight Reduction. Mods: Suspension Progress Springs, Bwoody Sway Bar, DC Sports STB. 15.347 @89.55 mph 2.296 60' I/E
Offline

09-26-2008, 07:55 PM	#3
Cobalt07LS Member Join Date: Jan 2008 Location: Smithfield, NC Age: 21 Posts: 495 Credits: 7,144	Adj. timing gears? Do you know who has those available?? Do I need these with the trifecta tune?
Offline

09-26-2008, 08:20 PM	#4
DUFFY CUSTOMIZER Join Date: Jan 2008 Location: White Bear Lake, Minnesota Age: 23 Posts: 1,952 Credits: 18,251	I know I've seen them a few other places. Here's the link to the ones crate engine depot has. Ecotec Adjustable Cam Gear Set 88958613 - Crate Engine Depot You can search a few more of these websites and see what you come up with. Websites for parts EDIT: I also found these at J-Body Performance Part Details JP0889 __________________
Online!

09-28-2008, 01:47 AM	#5
Maven Member Join Date: Sep 2008 Location: May Landing, NJ USA Posts: 130 Credits: 4,061	While a tune will obviously help you get the most out of the cams, its the least of your concerns. The Comp cams for the 2.2 will work in your car *only once you:* remove the camshaft reluctor wheel from your stock intake cam and have it PROPERLY pressed onto the new Comp cam and timed to the cam, then you need to have the intake cam shortened. These cams ARE NOT a bolt in mod.
Offline

09-28-2008, 11:56 AM	#6
1^up Banned Join Date: Sep 2008 Posts: 1,069 Credits: 1	i like reading your posts maven make more there filled with good info! help me mod my car? lol
Offline

09-28-2008, 01:40 PM	#7
Delta2.2 Corps Member Join Date: Mar 2008 Posts: 227 Credits: 5,592	if ur car is a 2007 or newer 2.2 cobalt, CAMS WONT WORK. just letting you know __________________ http://img218.imageshack.us/img218/2456/ubd8871zs6.png
Offline

09-28-2008, 05:17 PM	#8
1^up Banned Join Date: Sep 2008 Posts: 1,069 Credits: 1	gay
Offline

09-28-2008, 06:40 PM	#9
Maven Member Join Date: Sep 2008 Location: May Landing, NJ USA Posts: 130 Credits: 4,061	no, they work, just with the caveats I listed.
Offline

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.localcobalt.net/forum/2-2l-performance/1613-comp-cams-tune.html
Posted By	For	Type	Date
stage one cams - YourCobalt.Com	This thread	Pingback	10-01-2008 09:34 AM