This Area is for Step by Step Guides and " How To " Instructions Only ~~ NEW THREADS NEED TO BE APPROVED BY A MODERATOR BEFORE THEY WILL SHOW UP
Sticky Threads
OK, first off you don't have to be a Premium member or have a certain amount of posts to post pictures in threads. Here is how you post a picture in...
Normal Threads
What you'll need: -Small tip regular/flat blade screwdriver -13mm socket -18mm socket -Ratchet (same size as sockets) -Breaker bar (optional but...
TOOLS NEEDED 10MM RATCHET WRENCH 13MM DEEP SOCKET 14MM DEEP SOCKET & BOX END WRENCH 15MM DEEP SOCKET 13MM SOCKET & OPEN BOX END WRENCH 15MM...
if you are tired of replacing those cheap rubber cabs just to have bad handling and knowing they will fail again shortly. well never enough auto has...
Ok guys Tech Crap upfront: Neither I nor LCN are responsible for any damages to brain cells or you computer programing while attempting this sick...
First off I would like to welcome all of the new members to LocalCobalt.Net (LCN) Today we are going to show you how to create a members garage to...
Is your LNF powered Cobalt SS leaking oil from the drivers side of the cylinder head? Has your local GM dealership been less than helpful on the...
The Jegs Catch Can Pictured in this How To is no longer available, but there are plenty of universal cans out there that will work just the same. If...
It's called Nightshades. This can be applied to tail lights, side markers or even to add eyelids to your headlights. I strongly recommend removing...
Ok, first and foremost, I nor LCN are liable for any damages to you or your vehicle. Ok now that the technical stuff is out of the way, I get came...
This is much awaited HOW TO PLUG YOUR SUPERCHARGER SILENCER HOLES, niether red06s/c, myself, or LCN are responsible for anything that may happen upon...
I will show you how to paint some custom your one of a kind eyelids to make your car look meaner or droopy? 1. What you will need: Blue painters...
this is my first how to so take it easy on me. if there is anything i missed ,let me know so i can fix it. i suggest you get a second pair of oem...
How to install the Modern Performance smoked taillights. Tools Needed -3/8" Ratchet -10mm deep socket - 11mm deep socket - Extension bar
I'm going to tell you how to install a Cobra heat exchanger in a Cobalt SS S/C. Its a fairly long and difficult project, but it's doable for less...
Tools Needed: ------------------ Wire Crimpers Wire Stripers Connectors Lets get started! 1. First you need to remove the lights if you...
This DIY how to is for all you 2.0 SS/SC guys and gals. Doing a transmission service is very simple on these engines. If I forgot anything please...
I have gotten a lot of compliments and questions about the painted trim on my steering, so here is a how to. It's really easy and doesn't take long...
ok first you need to let your engine cool down. get out a flat head screwdriver, a pair of pliers, ratchet with a 10 mm, and a fuel connector tool....
***My first How To Thread*** so bear with me. **Note i had to rush out but ill come back to edit and do everything in detail*** Ok first you...
Well here i am again wit a new mod that will benifit, seen this somewhere else and thought id try. its good from what a dealer told me cuz it takes...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules